Workshop

The robotic system learning activities held at the School District, 4th (Home County) Province, on the past 14 to 16 October 2553 with participants from the public school students at four locations of the 25 students and teachers. In addition, there are 5 people, three teachers from the school house. Province were a youngster and teacher of high school students Sika. Bangkok for 2 people, including those from NSTDA. Network northern Thai province of Rayong 1 Cement, 2, and the appeal of a cement company in Thailand, Lampang people.

On October 14, 2553 The opening event was the opening speech by a teacher Yupin Trang and Tan, director of education. Public school after Dr. Anand Si 4 locations to protect the honor. Lecturer, Department of Computer Engineering. Faculty of Engineering Chiang Mai University. Speakers in this time of the introduction of robots to learn GoGo Board has recommended to the program GoGo Monitor to use a robot GoGo Board, and the device sensor, motor, LED, which is the input and output of the robot GoGo. Board by providing participants an opportunity to try out the equipment, sensors, motors, LED and basic programming. After participants have made a domino project that each group will receive input from the previous group and The order that is designed for. And then send the output to the input of the next group. All groups must have thought the results of their own. And to consult with the side to get the input and output is an activity that promotes teamwork and collaboration with other teams.


On 2 and 3 of this activity, Dr. Anand has introduced about the project can apply knowledge gained in the classroom to integrate the work of their own interest. In the morning participants to consult with members of the group to work as their own interest, and refine the idea by writing a Mind map to be compiled and presented to the other teams participating in this event. The project participants are invented all of this with the following nine projects.

 

  1. The rat cage automatically.
  2. Smart car plants.
  3. Smart Trash.
  4. Trash automatically.
  5. Automatic blinds.
  6. Fans turn off the sound.
  7. The automatic feeding fish.
  8. Invention, a safe deposit box.
  9. Defense systems in automation.

 

Smart cage mousetrap. Traps along the way ..... I have several here in my work.

 

Automatic cage mousetrap. 

The automatic cage mousetrap will have two parts: the first is the use of food as a lure with a mousetrap when it comes to eating, it will switch to the motor to close the cage door. The cage door between the front and the back cage turns out to be an infrared sensor is checked when I ran into the back door of the cage, the cage between the front and the rear enclosure and the front door will be closed. On to the next mousetrap. This is a project that will be useful because it makes it possible to trap multiple mice simultaneously. Save time and bring it to them as well. The GoGo Board is used to control the operation of the sensors and motors to open the capital account.

 

The group was in grade 5 my smart car plants.

 

Smart car plants.

Group performing the intelligent car, watering the plants have no idea what to do to be able to automatically water the plants with an order that is not exert a day. This project is made up. The project will have a timer that can be watered only between morning and evening every 12 hours and the humidity sensor was fabricated using a 2 wire line to check for moisture. In case of rain will water the plants. The infrared sensor detects a tree. By the time the car will run along the water to water the plants. The infrared sensor has been changed to water the plants. The GoGo Board used a timer and a sensor to control the operation of a motor vehicle, which served to order.

 

Trash the genius of their hair. Garbage can with it.

 

 

Smart Trash.

The trash genius of the idea of ​​team members who think that problems in the community. The waste is not exposed to the trash with the lid open before hand for fear of polluting waste. So why waste it on a trash can lid, the lid of the garbage piling up a lot of trash. Membership functions, thus helping to invent ways to solve such problems. By creating a platform for the sensor checks the type of waste and garbage. Divided into three buckets. For biodegradable waste is difficult (such as plastic bags - clear, light and dry) rapid decay (eg, wet banana leaf - the weight is quite heavy, light and humidity), and others. That can not be detected by a sensor (paper) by this work, all four sensors to detect the sensor is composed of switches. Which is used to determine whether the waste is placed on the altar, to determine what kind of junk or not. The bulk of the remaining three sensors to check the value. The sensor switches are placed at the bottom of the cradle if the waste is heavy waste to press the switch, the sensor switches the switch. The second sensor, humidity sensor made of two strands of wire. Verify that the waste is damp or not. The last sensor is a light sensor to monitor the transparency of garbage. The GoGo Board is used for the sensor to control the operation of a motor to open the lid on the trash.

 

Did you see my bin? The lid will open where there's a trash.

The automated trash. 

Automatic trash bins that are similar to the intelligence, but it works well with this machine will make sure it is spam or not. If you want to throw out the garbage at the garbage, and an infrared sensor to detect the trash lid is opened and the waste is a waste. Minimize contact with the lid on the trash bins.

 

I was in grade 5 I made ​​a curtain opens and closes automatically. If the sun shines through the curtain was about to close. Night, it turns out. Not easy.

 

 

Automatic blinds.

The curtain will close automatically when the light curtain and the curtain will open on darkness. The GoGo Board is to use the light sensor and control the operation of a motor to open the curtains.

 

What fans say voice commands to open, close it.

 

 

Fan Voice.

This work made by public school teachers, with four locations to develop a fan who wanted to voice commands. If the No. 1 fan rotation noise level low. Noise of the second fan will turn up. When the noise of the fan stops rotating. The starting of a new sound. The amplifier module is connected to the GoGo Board of robot control and programming of a fan motor.

The automatic feeding fish.

Machine will automatically feed the fish to feed fish at the time. The timer at the end of time. With the use of a motor to turn the fish. The GoGo Board used as a counter and control the operation of the motor.

 

 

 

 

 

Invention, a safe deposit box.

The invention itself, this access comes from the idea that the GoGo Board needs to do to prevent theft. Team members have developed this work was the cover is open when the user presses the remote password is correct. Motor will rotate to cover up. Allow users to access the box's.


Defense systems in automation.

Defense systems in automation. Sika is the youngster's school teachers and interested students of Thai cement company in Rayong province because there are some schools where students are not allowed to enter. It may be unsafe. Team members have no idea how to find the sensor. Infrared to detect that at any one time with students in the area if the student is the GoGo Board has ordered the program to be careful and order the Microworld emits LED light and sound Beep to the teacher to hear. To remind students that live in the area.


All of this invention is an activity that encourages participants to be creative. I know the solution. Work done. As well as the integration of knowledge learned through this activity as well.