Downloads
Hardware
| Description | Download |
 |
GoGo Board
version 3.0 - Apr 15, 2005
This is our primary platform. It features eight sensor inputs and
four motor control ports. It can be controlled directly through a serial cable.
It can also run autonomously using the Cricket Logo Language. |
LINK
|
 |
Amplifier Module
version 2.0 - Jan 31, 2006
This module allows you to connect a microphone, vibration, and other sensors that generate
a fluxuating signal (AC voltage) to the gogoboard's sensor inputs. |
LINK
|
 |
Display Module
version 1.2 - Dec 26, 2006
This display module is useful to show simple four digit/character message without needing to be
connected to a computer. |
LINK
|
Older Hardware Versions
| Description | Download |
 |
GoGo Board
version 2.2 - Feb 14, 2004
|
LINK
|
 |
GoGo Board
version 2.3 - Sep 23, 2004
|
LINK
|
Software Tools
| Description | Download |
 |
GoGo Board Monitor and Active-X Control
version -
GoGo board Monitor is the main program you will be using with the GoGo board.
It allows you to observe sensor readings and directly control the
motor ports though a simple interface. You can also write Circket Logo procedures and
download them to the board. These procedures allow the board to run autonomously
without being connected to the computer. If you are a developer, GoGo Monitor also comes
with an Active-X control, which can be used to easily write a program to control the
GoGo board with Visual Basic or most other applications that support ActiveX (e.g. Excel, Access)
|
LINK
|
 |
Jackal GoGo Board Edition
version 0.91 - May 7, 2004
Jackal is a text-based authoring tool for the Cricket Logo language. |
LINK
|
Tethered Mode Libraries
| Description | Download |
 |
Microworlds Library
version 1.1 - Feb 10, 2005
This is a simple add-on to LCSI Microworlds that allows you
to control the GoGo board directly within the Logo programming environment.
It basically add a set of commands for you to read sensor data and control
the motor ports. This is similar to Yellow brick logo, but you do not program
the GoGo board (there's no downloading process). Rather, you control the board
directly. For example, you can type "show sensor1" in the command center and
you will get sensor1's value printed on the screen. The command "sensor1" is
added to MW by this library. |
LINK
|
 |
Imagine Library
version 2.0 - Oct 10, 2003
This library allows you to use IMAGINE logo version 2.0 or higher to
control the GoGo board. |
LINK
|
 |
GoGo Board DLL (Dynamic Link Library)
version 1.1 - Feb 10, 2005
The GoGo DLL provides access to GoGo board functionalities (tethered mode)
from any language and software environment that supports WIN-32 DLL calls. Examples
of these environments include C, C++, Visual Basic, Macromedia Director, Squeak,
and Microworlds Logo. |
LINK
|
 |
Squeak Library
version 1.0 - Oct 17, 2003
This library allows you to use Squeak to control the GoGo board. |
LINK
|
Other Software
| Description | Download |
|
Firmware Downloader
version 0.91 - Feb 14, 2004
This software allows you to download or upgrade your board with the newest firmware. |
LINK
|
|
